Effect of aluminum substitution on microstructure and magnetic properties of electrospun BaFe12O19 nanofibers

Abstract

BaFe12−x Al x O19 nanofibers (x = 0–2.0) with average diameter 110 nm have been prepared via the electrospinning and subsequent heat treatment at 1100 °C for 2 h. Individual BaFe12O19 nanofibers were composed of numerous nanocrystallites stacking alternatively along the long axis of fiber and the single crystallites on each nanofibers had random orientations. With increasing Al3+ ions substitution contents from 0 to 2.0, the diameter and morphology of nanofibers were almost no change. However, the lattice parameters decreased due to Fe3+ ions substituted by smaller Al3+ ions and the average grain size calculated by the Scherrer’s equation reduced from 47 to 42 nm. The crystallites possessed a hexagonal plate-like shape at x = 0 while they became rod-like with various Al3+ ions substitution. The X-ray diffraction patterns show that single-phase barium hexaferrite was formed when Al3+ ions substitution contents were less than and equal to 1.0, while other impurity phases were detected when they were more than 1.0. The chemical analysis shows that the element Al was all incorporated into the lattice of BaFe12O19 and evenly distributed throughout the BaFe12−x Al x O19 nanofibers. The magnetic testing shows that the saturation magnetization (M s) decreased obviously from 63.92 to 29.70 A m2/kg, while coercivity (H c) increased significantly from 288.2 to 740.7 kA/m with increasing Al3+ ions substitution.