Effect of alloy 625 buffer layer on corrosion resistance of nickel base hardfacing

Abstract

Nickel base hardfacing alloys serve to mitigate corrosion losses at elevated temperatures. Efficacy of Nickel base hardfacing alloys can be compromised when applied onto Fe base substrates due to iron dilution in hardfacing. The degree of Fe dilution can be reduced by using advanced deposition methods and optimized deposition parameters. Gas Tungsten Arc Welding (GTAW) method is commonly employed for its cost-effectiveness and versatility, but it tends to induce higher Fe dilution due to increased heat input. This study aims to reduce the degree of Fe dilution and enhance corrosion resistance by introducing a nickel base buffer layer (alloy 625) between the nickel base hardfacing alloy and AISI 316L stainless steel substrate. For comparative purposes, Ni base hardfacing alloy was deposited on the substrate without any buffer layer. Hardfacing depositions were prepared using manual GTAW process. Process parameters namely, deposition current, voltage, travelling speed, pre-heating temperature, and cooling method were kept constant. Samples underwent aging at 1123 K for 4 h, followed by microstructural examination via optical and scanning electron microscopes. Iron (Fe) dilution quantification was performed using energy dispersive spectroscopy (EDS). The EDS analysis showed that the use of buffer layer between the hardfaced deposit and the substrate decreased the degree of Fe dilution in the hardfaced deposit. X-Ray diffraction (XRD) analysis was performed to identify various phases formed in the hardfaced deposit. Potentiodynamic polarization test was performed to assess the corrosion resistance of hardfaced deposit in 3.5 wt% NaCl solution. Results show significant improvement in corrosion resistance of hardfacings deposited sample with buffer layer as compared to those without buffer layer. Aging treatment further enhanced corrosion resistance. The corrosion resistance data is correlated with the microstructure and phases formed in various samples.