Effect of Alkaline Sludge Fermentation Products on the Nitrification Process and Performance

Abstract

The aim of the present study was to investigate the effect of alkaline sludge fermentation products as a carbon source on the nitrification process and performance. During the operation of a biological nitrogen removal (BNR) system with sludge fermentation mixture as the carbon source, the activities of ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) were inhibited at the beginning. After 16 days, the activity of AOB began to recover rapidly, but the activity of NOB was still inhibited. The specific nitrate production rate (SNaPR, N/VSS) decreased from 0.1791 g·(g·d)-1 to 0.0078 g·(g·d)-1. At the same time, the nitrite accumulation rate increased from 8.12% to 91.42% and remained stable. The sludge fermentation mixture was separated into sludge fermentation liquid and sludge fermentation sediment. The changes in nitrification activity by adding different types of fermentation products were investigated. The results showed that the activity of NOB decreased in the experimental group fed with the sludge fermentation mixture and the fermentation liquid. The SNaPR decreased from an initial 0.1793 g·(g·d)-1 to 0.1510 g·(g·d)-1 and 0.1617 g·(g·d)-1, respectively. In the experimental group fed with fermentation sediment, the activity of NOB increased. SNaPR rose from 0.1793 g·(g·d)-1 to 0.1864 g·(g·d)-1. Therefore, the activity of the NOB can be inhibited when the sludge fermentation mixture and the fermentation liquid are used as a carbon source in the nitrification process. In addition, the short-range nitrification process can be realized, which is beneficial to accelerating the reaction speed and saving investment in this type of carbon source.