Abstract
Abstract The effect of an adhesion promoter (2-[thiophen-3-yl]ethyl phosphonic acid [C6H9O3PS]) in the corrosion protection of 1018 (UNS G10180) mild steel by using poly(3-hexylthiophene) (P3HT) coatings in 0.5 M sulfuric acid (H2SO4) solution was studied. Mirror-abraded steels were pretreated with the adhesion promoter. P3HT films were prepared by the drop-casting technique on pretreated and bare steels. The corrosion resistance of P3HT-covered steel substrates was evaluated using potentiodynamic polarization curves, linear polarization resistance, and electrochemical impedance spectroscopy. Results indicate that P3HT films improved the corrosion resistance of the steel in H2SO4 solution; however, the films deposited onto non-pretreated steel showed a better corrosion protection than the ones deposited on pretreated steel, even when the P3HT adhesion was improved. Equivalent electric circuit used to simulate the experimental impedance indicated that the corrosion mechanism in these materials is by charge...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
