Abstract
Low cycle fatigue specimens of the reduced-activation martensitic/ferritic steel EUROFER97 were neutron irradiated at 250 °C up to an accumulated dose of 16.3 dpa. After irradiation, the specimens were push–pull fatigue tested under strain–controlled conditions at 250 °C to determine the impact of irradiation on lifetime, fracture behavior, and microstructure. The typical cyclic softening of martensitic/ferritic steels was observed. Furthermore, a considerable increase of lifetime after irradiation and subsequent cycling at lower strain amplitudes was remarkable. This behavior was attributed to the homogeneous distribution of stable irradiation-induced dislocation loops and small precipitates acting as barriers for the cyclic motion of dislocations, thereby influencing substantially crack initiation and crack network formation. While in the un-irradiated material push–pull fatigue sweeps the dislocations to the boundaries, a significant fraction of dislocations was fixed at irradiation-induced defects after irradiation and fatigue testing.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
