Abstract
We report the results of the first phase of a study designed to quantify the relationship between eddy current coil construction and the performance of these coils used in nondestructive evaluation (NDE) inspections. The ferrite core coils wound for this study are small but typical of the sizes commonly used in commercially manufactured eddy current probes. Coil diameters range from 1 mm to 7 mm with lengths from 0.5 mm to 4 mm. Seven parameters were studied and included ferrite diameter, ferrite permeability, coil aspect ratio, number of turns, distance of the windings from the inspection end of the ferrite, wire gauge, and length of the ferrite beyond the end of the windings. Additionally, the coil set was designed to provide some indication of the repeatability of identical constructions, what we have called winding inhomogeneity. The coils were incorporated into surface probes for scanning defects in flat plate specimens. The measure of sensitivity was the change of probe impedance (ΔZ) as the probe was scanned from an unflawed area to the flawed area of the test specimen. Measurements were also made of the component of ΔZ perpendicular to the liftoff vector.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call