Abstract

The dynamics and stability of premixed hydrogen-air flames in square microchannels with heated walls were investigated through three-dimensional direct numerical simulations. The inlet velocity and equivalence ratio were 1.5 m/s and 0.5. The effect of the wall temperature gradient characteristics on the flame dynamics and stability was examined varying the width and location of the wall temperature gradient for a channel height of 1.5 mm. Five distinct flame modes were observed at different wall temperature profiles: flame with repetitive extinction-ignition (FREI), pulsating flame, laterally oscillating flame, spinning flame, and steady flame modes. Furthermore, transitions between these flame modes were observed for specific inflow and boundary conditions. The effect of the channel height on the flame stability was investigated by varying the channel height from 1.0 mm to 1.677 mm for a fixed wall temperature gradient. As the channel height was increased, four of the flame modes, namely, FREI, laterally oscillating flame, spinning flame, and steady flame modes appeared sequentially. To determine whether this sequential appearance was associated with the variation of the wall heat loss, the maximum wall temperature was changed by small amounts. For a lower wall temperature, the laterally oscillating flame mode transitioned to the FREI mode, and for a higher wall temperature, unstable flame modes such as the FREI and laterally oscillating flame modes disappeared, resulting in stable flame.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call