Dynamic subsidence simulation and topsoil removal strategy in high groundwater table and underground coal mining area: a case study in Shandong Province

Abstract

Coal mining in high groundwater table areas causes many environmental issues. In China, such regions have three unique and significant characteristics, (1) multiple coal seams; (2) thick coal seams and (3) high groundwater, which lead to mine subsidence ponds. In the past, reclamation of disturbed land was carried out after subsidence stabilised. Such reclamation is a low-percentage of reclaimed farmland, and has high reclamation cost, difficult construction conditions, because of relatively flat terrain and the shortage of backfilling materials in flat topography. Therefore, salvaging the topsoil before it is submerged in water and reusing it while subsidence becomes stable would be a good way to improve the reclamation efficiency. This paper considers a longwall panel in Shandong province as a case study. Dynamic mining subsidence was simulated using mining subsidence prediction software. To illustrate subsidence development and its effects on farmland, the ground was first divided into cell size of 40 m along with pre-mining topography. The mining subsidence and water logging time for each cell were then calculated. Based on the simulations, the topsoil removal time, scope and depth of topsoil was determined. The salvaged topsoil could be reused subsequently, which would provide enough filling material to raise the percentage of reclaimed farmland, and reduce reclamation costs. The research benefits the development of concurrent mining and reclamation technology in underground mining sites, and promotes the synchronisation of exploitations and treatments.