Dynamic pressure evolution during the LHC operation

Abstract

For the accelerator community and the vacuum scientists, the understanding of the beam interactions with a vacuum chamber is fundamental to provide solutions to mitigate pressure rises induced by electron, photon, and ion molecular desorption. Moreover, beam instabilities induced by ion and electron clouds must be investigated in order to find solutions to reduce them. This study presents in situ measurements of pressure evolutions and electrical currents performed during the LHC RUN II (2018). The proton beam circulating in the LHC vacuum chamber ionizes the residual gas producing electrons as well as positive ions. These charged particles are accelerated away from the beam and reach the vacuum chamber wall, inducing, among other phenomena, stimulated desorption and secondary electron emission. Moreover, protons emit synchrotron radiations that also induce photodesorption and photoelectron production. Experimental measurements of the electrical signals recorded on copper electrodes were compared to calculations considering both the secondary electron yield of copper and the electron energy distribution. All measurements performed with the Vacuum Pilot Sector in the LHC ring show the importance of taking into account a large variety of phenomena in order to understand the pressure evolution in the LHC. Results show that the multipacting threshold, corresponding to an increase in the electron cloud density, strongly depends on the number of protons per bunch. Finally, the ion current was measured with a biased electrode lower than $\ensuremath{-}500\text{ }\text{ }\mathrm{V}$. It was much higher than expected, pointing its origin not only from simple beam-gas ionization but also from the ionization of the residual gas by the electron cloud.