Dynamic Optimization of Drivetrain Gear Ratio to Maximize Wind Turbine Power Generation—Part 2: Control Design

Abstract

The cost of electrical power produced by small wind turbines impedes the use of this technology, which can otherwise provide power to millions of homes in rural regions worldwide. To encourage their use, small wind turbines must capture wind energy more effectively while avoiding increased equipment costs. A variable ratio gearbox (VRG) can provide this capability to the simple fixed-speed wind turbine through discrete operating speeds. This is the second of a two-part publication that focuses on the control of a VRG-enabled wind turbine. The first part presented a 100 kW fixed speed, wind turbine model, and a method for manipulating the VRG and mechanical brake to achieve full load operation. In this study, an optimal control algorithm is developed to maximize the power production in light of the limited brake pad life. Recorded wind data are used to develop a customized control design that is specific to a given site. Three decision-making modules interact with the wind turbine model developed in Part 1 to create possible VRG gear ratio (GR) combinations. Dynamic programming is applied to select the optimal combination and establish the operating protocol. The technique is performed on 20 different wind profiles. The results suggest an increase in wind energy production of nearly 10%.