Dynamic installation of torpedo anchors in slightly overconsolidated clay-overlaying-sand deposit

Abstract

Torpedo anchor installation involves uncertain design and construction parameters, especially in layered soil deposits. Large deformation finite element and coupled Eulerian–Lagrangian (LDFE/CEL) analyses are performed in this study to elucidate the dynamic installation of torpedo anchors in an over consolidated clay-overlaying-sand deposit. The parametric analysis is conducted after model verification to explore the effect of upper clay layer thickness, anchor impact velocity, anchor submerged weight, soil properties and anchor geometric dimensions. The soil failure patterns and dynamic installation behaviour in the clay-overlaying-sand soil deposit are found to differ substantially from those in single-layer clay and sand deposits, which exhibit a squeezing flow pattern at the clay-sand soil layer interface. As the demarcation of the two velocity phases during the anchor penetration process (acceleration and deceleration phases) falls below the interface of two soil layers, the contribution of the internal friction angle of sand to the anchor final penetration depth exceeds that of the clay undrained shear strength. Based on intensive modelling data, an empirical method for predicting the anchor penetration depth in single and layered soil deposits is derived for engineering applications.