Abstract

An external-cavity laser with resonant optical feedback is a common and mature method to achieve narrow linewidth lasers. Since the proposal of optical feedback in 1964, a series of studies on resonant optical feedback have been reported. Although longer feedback length leads to narrower linewidth, it also introduces coupling of environmental noise and causes instability in the laser cavity, which is detrimental to high-speed tuning of the laser wavelength. With such a challenge, current research on resonant optical feedback primarily focuses on the static results of laser linewidth compression. In order to obtain narrow linewidth high-speed tuned external-cavity lasers, further research on the laser dynamics is required to obtain dynamic tuning of narrow linewidth external-cavity lasers. In this work, we construct an external-cavity laser based on resonant optical feedback, and utilize a coherent detection method to measure the dynamic process of laser linewidth compression and wavelength tuning. Based on resonant optical feedback from the external cavity, the linewidth of the main-cavity laser can be compressed from near 100 kHz to the 100 Hz level, with the frequency noise compressed from the order of 104 to the 102 Hz2/Hz level. Since the wavelength switching process includes frequency shift process, linewidth compression process, and frequency stabilization process, etc., we first conduct a research on laser linewidth compression dynamics. In the results of linewidth compression dynamics, we discover that using a shorter fiber ring results in shorter linewidth compression time, which is advantageous for laser dynamic tuning. We subsequently carry out the laser wavelength switching process with a main-cavity switching time in milliseconds. In the wavelength switching process, while undergoing the frequency shift process of fast tuning transient laser frequency, the laser first undergoes the linewidth broadening process, then enters the main-cavity laser frequency stabilization process and undergoes the linewidth compression process at the same time. The experimental results show that the 100 m feedback fiber ring will not significantly increase the external-cavity laser wavelength switching time under the condition that linewidth compression is faster than main-cavity laser switching, while a longer fiber ring will introduce a strong noise. Our work experimentally demonstrates that shorter feedback ring lengths lead to faster compression, which provides valuable insights for the development of high-speed and high-precision tunable narrow linewidth external-cavity lasers.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.