Abstract
Studies on flow through cylinders have been widely carried out, both experimentally and numerically. The purpose of those studies is to obtain information about flow phenomena around the cylinder arrangement, such as aerodynamic forces, vortex shedding, and vortex-induced vibration. This study aims to evaluate the flow characteristics that pass through three circular cylinders arranged in a stagger and reduce the drag force (CD) by adding 3 disturbance bodies (DB) around the upstream cylinder. The longitudinal distance L/D varies from 1.5 to 4.0, while the transversal distance T/D is kept constant. Next, the diameter ratio d/D is set to 0.16. The diameter of cylinder 1, D=25 mm, and the diameter of the DB, d=4 mm. The DB is placed around cylinder 1 at three angle locations with a gap, δ=4 mm. The study is performed using Ansys fluent® 19.1 software in 2-D unsteady RANS with the transition k-kl-omega turbulence model. The flow Reynolds number based on D is22x104. The results showed that the L/D and the use of DB affect the cylinderdrag coefficient (CD). There is a CD reduction for cylinder 1 up to 20% atL/D=3.0. For cylinders 2 and 3, the reduction in CD occurred at L/D=4.0 upto approximately 13% and 17%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.