Dynamic behavior of axially loaded masonry walls strengthened with different innovative techniques under explosion loading

Abstract

In the realm of construction engineering, brick masonry stands out as a pivotal structural element, renowned for its widespread application. Given the load-bearing nature of masonry structures, the ramifications of wall failure under extreme loads induced by explosions are profound. Particularly concerning is the out-of-plane failure of walls, which occurs without warning and affords scant time for assessment of their response. Brick masonry, characterized by its brittleness and susceptibility to cracking, presents inherent challenges in this regard. Recent examples, such as the Beirut explosion in 2020 and the Nashville bombing in 2020, vividly illustrate the devastating consequences of inadequate blast resistance in masonry structures. These incidents serve as poignant reminders of the imperative to fortify masonry constructions against explosive threats. While ample research exists on the behavior of free-standing braced and unbraced masonry walls subjected to explosive loading, there remains a notable gap in understanding the response of strengthened masonry walls exposed to blast loading, especially when carrying varying axial loads. This study addresses this gap by investigating different strengthening methodologies, namely (1) Cement-mortar plaster, (2) Ferro-cement, and (3) Carbon Fiber-Reinforced Polymer (CFRP) laminate, aimed at enhancing the anti-blast performance of unreinforced masonry walls. The experimentation focuses on a specific unreinforced masonry wall measuring 5000 × 2800 × 230 mm3, constructed from clay bricks and subjected to axial compressive loads of 51, 30, and 9kN/m, corresponding to the loads on the 1st, 2nd, and 3rd storey walls of a 3-storey masonry building, respectively. Utilizing a sophisticated finite-elements code, Abaqus, equipped with an explicit module and Concrete Damage Plasticity model, the blast simulations are meticulously conducted. The walls are meticulously modeled through detailed micro-modeling techniques. Results showed that the utilization of CFRP on the explosion-facing surface of the wall resulted in a remarkable reduction in damage, with the highest decrease of 64% achieved under the lowest axial compression. Conversely, the minimum decrease of 61.71% was recorded under maximum axial compression, highlighting the efficacy of CFRP in mitigating damage caused by explosions on walls. This research sheds light on effective methods to enhance the blast resistance of masonry walls, offering valuable insights for improving structural resilience and informing building codes. Its findings are crucial for ensuring the safety and security of infrastructure against explosive threats, ultimately safeguarding lives and property.