Abstract
This study assessed stress distribution, maximum stress values and fatigue life of experimentally designed NiTi rotary files with different cross-sectional geometry and pitch length using finite element analysis (FEA). Four cross-sectional shapes (Convex triangle, S-shaped, Triple helix and Concave triangle) and two pitch lengths (2 mm and 3 mm) were tested in simulated root canals with curvatures of 30°, 45° and 60°. The FEA results indicated that convex triangle and triple helix geometries exhibited lower stress values compared to the S-shaped and concave triangle designs. Increasing the canal curvature angle resulted in higher stress values, with the S-shaped instrument showing the most significant increase (up to 12%). Instruments with shorter pitch lengths showed more even stress distribution enhancing fatigue life. The maximum stress was concentrated 5-8 mm from the tip, varying across cutting edges, with S-shaped sections experiencing the lowest forces but higher stress due to lower moments of inertia.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call