Abstract
Due to its extremely low fracture toughness of brittle materials, it is difficult to obtain deep micro-structures on brittle materials with ultra-smooth surface quality using previous ductile machining models based on plunge cutting, diamond milling, and grinding. Current methods to enhance the machinability of silicon include laser-assisted machining, ion implantation modification, and vibration-assisted machining. However, the increase of the ductile machining depth using these methods is still very small in the fabrication of deep micro-structures with a depth over tens of micrometers on silicon. This chapter proposes a novel ductile machining model for ultra-precision fly cutting (UPFC) to efficiently fabricate deep micro-structures on brittle materials. The modeling results show that through configuring a large swing radius, much deeper ductile machining depth can be reached by UPFC. To confirm this proposed model, micro-grooves with different depths were machined, and the surface micro-topographies, form error, tool wear patterns, and material phase transformation were analyzed and compared with that acquired by diamond sculpturing method. The experimental results demonstrated that much deeper micro-grooves (over tens of micrometers) with better surface quality were acquired by UPFC. Moreover, compared with the sculpturing method, UPFC prolonged the tool life and generated less amorphous silicon on the machined surface.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call