Abstract
High temperature heat pump (HTHP) is an energy-saving solution to recover the industrial waste heat. Five configurations of dual-pressure condensation HTHP are proposed and studied to improve thermal matching in the heat sink. The energy and exergy models are established, and the performance of dual-pressure condensation HTHP systems is assessed and compared with that of traditional single-stage, two-stage and cascade HTHP systems in detail. The results show that the dual-pressure condensation HTHP system is superior to traditional HTHP system from the perspective of energy efficiency and exergetic performance. A maximum COP is obtained at the optimum intermediate water temperature. The COP of dual-pressure condensation water-cooled saturated system (DWSAS) is the highest of 4.16, and 3.37–9.34% higher than the traditional HTHPs. R1234ze(Z) shows much higher energy efficiency over the other refrigerants for the applications of HTHP, and the COP is 2.62–4.47% larger than using R600a at the outlet temperature of heat source of 15–35 °C. The exergy destruction is also significantly reduced by using dual-pressure condensation HTHPs due to the improvement of thermal matching in the condensers. DWSAS shows the lowest exergy destruction, which is 4.28–19.35% lower than traditional HTHPs. DWSAS by using R1234ze(Z) is recommended due to its outstanding energetic and exergetic performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
