Dual-threshold Time-over-Threshold nonlinearity correction for PET detectors

Abstract

The Time-over-Threshold (ToT) analog-to-digital signal processing approach provides a power-efficient and cost-effective technique to extract all relevant information from detectors in high-energy physics and Positron Emission Tomography (PET) imaging. In this work, three calibration methods were investigated to correct the inherent nonlinear response of the ToT data using 1) γ-ray sources of various energies, 2) internal electronic gain variation in the LabPET II ASIC in combination with a single energy γ-ray source, and 3) internal gain variation along with an embedded pulse charge generator in replacement of a γ-ray source. The electronic gain calibration technique was shown to achieve equivalent correction accuracy as the γ-ray sources calibration. Furthermore, this method has the advantage of allowing a faster calibration requiring only one single γ-ray source (e.g., 511 keV) and a quick automated routine to sweep the internal gain. The last technique would be the most convenient method, provided that the signal pulse shape would be similar to the detector signal responding to a typical γ-ray event. Whereas the concept was demonstrated with a step pulse, extensive processing would be required to recover the nonlinearity correction factors for the detector pulse shape. After calibration, the 511-keV energy resolution of typical LabPET II detectors was only slightly degraded, by less than 12% and 8% for methods 1) and 2), respectively, relative to a conventional ADC-based data acquisition system. The feasibility of fast and accurate calibration for the nonlinearity correction of ToT data in PET imaging was demonstrated, making a daily quality control within reach.