Abstract
The development of real-time online warning system for toxicity materials is important to ensure the safety of water supply. This study for the first time constructs luminescent bacteria (Vibrio fischeri) biofilm to deliver both electrical and optical real-time response for Cu(II) toxic shock in a bioelectrochemical system (BES) sensor. Compared to biocathode, bioanode was more suitable as sensitive elements. With three tested concentrations of Cu(II), i.e., 1 mg/L, 3 mg/L and 6 mg/L, electrical signals were raised. But optical signal failed to respond to the lowest concentration, suggesting that electrical signal then was produced by chemical reaction of Cu(II) on the electrode surface. For 3 mg/L and 6 mg/L Cu(II) shock, more rapid optical signals were observed than electrical signal, indicating that both the biofilm's surface and inner was affected. In addition, high concentration of Cu(II) toxic as 6 mg/L caused irreversible damage in the biosensor as there were great fluctuation in the recovery curve and large recovery ratio up to -10.39% for optical signal. These results provided a comparison between optical and electrical signals simultaneously produced by a biosensor and visual evidences for better understanding of the toxicity process in the biosensor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.