Abstract

Abstract The radar bright band is caused by melting ice crystals, and results in inflated reflectivity observations. If uncorrected, the bright band can result in large errors in radar-derived quantitative precipitation estimation (QPE). In the operational Multi-Radar Multi-Sensor (MRMS) system up to version 12.1, the effects of the bright band are corrected through the use of a reflectivity-only, tilt-based apparent vertical profile of reflectivity (tilt-VPR). This study utilizes dual-polarization (dual-pol) radar observations to improve the tilt-VPR methodology. To accomplish this, a brightband area delineation was developed within the MRMS framework and the brightband top and bottom heights were identified for individual tilts of radar data. This information was used to develop a radially dependent dual-pol VPR (dpVPR) model that can better correct reflectivity in situations of nonisotropic bright bands and low brightband events. This algorithm has been tested on 14 varying brightband events across the CONUS and compared with the tilt-VPR and the National Weather Service Weather Surveillance Radar-1988 Doppler Level-3 Digital Precipitation Rate (DPR) products. The radially dependent dpVPR correction provided a more accurate detection of brightband areas and a more effective reduction in QPE errors within and above the bright band than the tilt-VPR and DPR QPEs, especially for precipitation events with low melting layers or with strong variability of vertical motions. The brightband delineation and dpVPR methodology are also evaluated in the real-time MRMS testbed for their robustness and computational efficiency and has been transitioned into operations in 2022.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.