Abstract
Multi-parameter surface plasmon resonance (SPR) sensors generally have low detection sensitivity due to detection wavelength limitations. We developed a two-parameter SPR sensor for refractive index (RI) and temperature detection by cascading Ag/WO3 film photonic crystal fiber (PCF) and Ag/MoS2 film PCF together. By using WO3 film with a low effective refractive index to prevent oxidation of silver-based PCF and maintain a wider RI sensing channel detection band; at the same time, MoS2 film with a high effective refractive index is used to modulate the detection range of temperature sensing channel. The detection performance and stability of the two-parameter SPR sensor were verified by software simulation and experiments. The data results indicate that the sensor can perform stable and independent tests during RI and temperature detection. The maximum sensitivity of the sensor within the RI detection range of 1.333 to 1.395 is as high as 6443 nm/RIU; the maximum temperature sensitivity within the temperature detection range of 40 °C∼90 °C is 8.72 nm/°C. This sensor can achieve high-sensitivity RI measurement in a high-temperature environment. This will have broad application prospects in the field of biochemistry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.