Dual-Notched UWB Orthogonal MIMO Antenna with Improved Gain Characteristics Using Frequency Selective Surfaces for Wireless Communication Applications

Abstract

In this paper, a complementary split ring resonator (CSRR) loaded compact CPW-fed circular shaped monopole UWB antenna with dual band notch characteristics is designed on an FR-4 substrate. The propounded band-notched UWB antenna is integrated with two frequency selective surface layers referred as bandpass frequency selective surface (FSS-1) and reflector (FSS-2) to offer enhanced radiation performance. Bandpass FSS-1 enhances the gain of the antenna by improving directivity and reflector FSS-2 reflects back the backside radiation of the proposed antenna towards the forward direction thereby increasing gain and directivity of the proposed antenna. Furthermore, a two-element orthogonal MIMO antenna is proposed with improved gain using two FSS layers. The complete configuration of the proposed two-element MIMO antenna consists of CSRR-based radiating patches, monopole ground planes and two integrated FSS layers. The proposed MIMO antenna operates in UWB range from 3.46[Formula: see text]GHz to 16.02[Formula: see text]GHz with dual notches at 3.9[Formula: see text]GHz and 7.2[Formula: see text]GHz. Isolation between MIMO elements is greater than 23 dB. Both antennas are fabricated and investigated at 5.9[Formula: see text]GHz for vehicular communications. Maximum gain improvements of 8 dB and 6.4 dB are observed in case of the presented single element and MIMO antenna within the entire operating band due to the integration of dual FSS layers. The diversity performance of the suggested MIMO antenna is investigated by analyzing mean effective gain, envelope correlation coefficient, channel capacity loss and diversity gain parameters. The proposed MIMO antenna is a suitable candidate for vehicular and UWB wireless communication applications.