Abstract

The intensity-modulation (IM)/direct-detection (DD) systems have been proven effective and low-cost due to their simple system architecture. However, the Mach-Zehnder modulator (MZM) of the IM/DD systems only reserves its driving signal intensity. Therefore, the IM/DD systems are generally unable to transmit vector signals and have a restricted spectrum efficiency and channel capacity. Similarly, the radio-over-fiber (RoF) transmission systems based on IM/DD are limited by their simple architecture and generally cannot transmit high-order quadrature amplitude modulation (QAM) signals, which hinders the improvement of their spectrum efficiency. To address the challenges, we propose a novel, to the best of our knowledge, scheme to simultaneously transmit the dual independent high-order QAM-modulated millimeter-wave (mm-wave) signals in the RoF system with a simple IM/DD architecture, enabled by precoding-based optical carrier suppression (OCS) modulation and bandpass delta-sigma modulation (BP-DSM). The dual independent signals can carry different information, which increases channel capacity and improves spectrum efficiency and system flexibility. Based on our proposed scheme, we experimentally demonstrate the dual 512-QAM mm-wave signal transmission in the Q-band (33-50 GHz) under three different scenarios: 1) dual single-carrier (SC) signal transmission, 2) dual orthogonal-frequency-division-multiplexing (OFDM) signal transmission, and 3) hybrid SC and OFDM signal transmission. We achieve high-fidelity transmission of dual 512-QAM vector signals over a 5 km single-mode fiber (SMF) and a 1-m single-input single-output (SISO) wireless link operating in the Q-band, with the bit error rates (BERs) of all three scenarios below the hard decision forward error correction (HD-FEC) threshold of 3.8 × 10-3. To the best of our knowledge, this is the first time dual high-order QAM-modulated mm-wave signal transmission has been achieved in a RoF system with a simple IM/DD architecture.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call