Dual-frequency ultrasonic cleaning with diluted phosphoric acid solution for removing oxide scale of uncoated steel sheets in hot stamping

Abstract

Dual-frequency ultrasonic cleaning with a diluted phosphoric acid solution was developed to remove oxide scales on surfaces of hot-stamped parts from uncoated steel sheets, and conventional shot blasting processes are omitted. The removal of the oxide scale by ultrasonic cleaning is accelerated by the phosphoric acid solution and the dual frequency. The removing time for the phosphoric acid solution was shorter than that for a hydrochloric acid solution, and rust appearing for leaving after cleaning was prevented by generating an iron phosphate layer. In dual-frequency ultrasonic cleaning with the diluted phosphoric acid solution, the oxide scale was dissolved, and then the oxide scales were exfoliated from the thin scale and high-pressure portions. The removing time decreased with decreasing pH and oxide scale thickness and with increasing solution temperature. The surface roughness and distortion of an ultrasonic-cleaned hot-stamped part were smaller than those for shot blasting, and the weldability and paintability were similar. The oxide scale of a hot-stamped part having a nonuniform distribution of oxide scale thickness was successfully removed by dual-frequency ultrasonic cleaning with the diluted phosphoric acid solution.