Abstract
Convective drying of mung bean seeds was conducted to investigate drying kinetics and mass transfer parameters at temperatures of 40, 50, 60, 70, and 80°C and a fixed air velocity of 1.2 m s-1. Drying characteristics were determined by drying rate, moisture ratio, diffusion coefficient, activation energy, Biot number, and mass transfer coefficient. Drying models such as Newton, Page, Henderson and Pabis, Logarithmic, Midilli, Two-term, and Diffusion approximation were applied and fitted to the moisture ratio of the experimental data. The drying rate was significantly affected by the drying temperature. The Midilli model was considered the most suitable for experimental drying curves. The effective moisture diffusivity ranged from 3.19×10-9 to 10.76×10-9 m2 s-1, with an activation energy of 59.78 kJ mol-1. Similar to the mass transfer coefficient, the Biot number increased with increasing drying temperature. The simultaneous transfer of heat and mass was controlled by diffusion and surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.