Abstract
Laminates of fibre-reinforced prepreg have excellent in-plane mechanical properties, but have inadequate performance in the through thickness direction. Here, we address this issue by application of epoxy-terminated butadiene nitrile (ETBN) liquid rubber between the prepreg laminae using an automatic draw bar coating technique. Test results reveal that by adding ETBN in small quantities in the range of 9.33–61.33 g/m2, the interlaminar critical energy release rates (GIc and GIIc) are improved by up to 122% in mode-I and 49% in mode-II. Moreover, this finding is further supported by the dynamic mechanical analysis thermograms that clearly indicate that coating has not altered the Tg of ETBN-coated samples. Scanning electron microscopic analysis of fracture surfaces showed that rubber particles formed micro cavitations in the epoxy, causing localised rubber rich regions. These resin-rich regions require more energy to fracture, resulting in increased toughness of the glass epoxy prepreg systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
