Abstract
We investigated the difference between measured and manufacturer's nominal source strength in a large sample of a single model of (125)I seeds. Physical characteristics of single seed measurement by the well-type ionization chamber were also investigated to provide dosimetric data. A well-type ionization chamber with a single seed holder was used to measure source strength of all 1935 (125)I seeds implanted in the initial 28 patients in our hospital. Physical characteristics including linearity of readings for different integral time intervals, reproducibility, isotropy, and axial positional sensitivity were assessed. To calculate the source strength, the integral charge during 30 s was measured and converted to air kerma strength. The nominal activity stated by the manufacturer was compared with the measured value. Linearity, reproducibility, and isotropy of the well-type ionization chamber were within 0.2%. Measured source strength was on average 2.1% (range -7.6% to +7.2%), lower than the nominal value. Standard deviation of all measured seeds was 2.0%. The maximum difference between the measured and the manufacturer's nominal source strength in each patient was -3.7%. The standard deviation averaged 1.6%. The nominal source strength of the (125)I seeds agreed well with the measured value. Our study can be helpful as guidance for individual (125)I seed source strength measurement.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call