Abstract

To study the evolution of geological hazard sources of waste dump slopes under rainfall conditions, a physical model of a rainfall-affected slope was designed. The apparent resistivity of the slope rock and soil mass at different rainfall times was measured via the high-density resistivity method, and the formation process of internal disaster sources of the rainfall-affected slope was obtained. The variation characteristics of the resistivity of the rain-affected slope were analyzed when it had a weak surface and crack development. Based on the three-water model and Maxwell conductivity formula, the evolution process of geological hazard sources of the rainfall-affected slope was summarized. A resistivity response mechanism equation for rainfall-induced slope hazard sources was derived and compared to the Archie formula, verifying the model rationality. The test results showed that the behavior of the rainfall-affected slope conforms to the saturated–unsaturated dynamic cycle process. The apparent resistivity was positively correlated with the development of slope pores and cracks and negatively correlated with the water content in the slope. The apparent resistivity increased during fracture development and decreased during water seepage. In the slope failure and disaster process, the apparent resistivity varies under the coupling effect of crack development and water seepage. During the formation of geological hazard sources, the apparent resistivity abruptly changes and fluctuates. Therefore, according to the abrupt changes and abnormal fluctuations in the apparent resistivity detected, the development of geological hazard sources of slopes can be determined.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call