Abstract
The aim of this article is to develop a novel distributed direct power sliding-mode control for an islanded AC microgrid. This solution replaces the droop mechanism of each inverter with two separate sliding surfaces working as primary/secondary controllers. The design of these surfaces is based on the dynamic model of the active and reactive powers to enhance the robustness against line impedance mismatches. Moreover, a theoretical stability analysis is presented. The main features of this proposed control are to regulate the voltage and frequency achieving an accurate active and reactive power sharing, achieve stability under a wide range of line impedances, and provide robustness toward external disturbances, including communication failures. Finally, the experimental results verify the controller performance, the stability with different line impedances, and the robustness against communication partitions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.