Abstract

This paper proposes a new control sharing method for parallel three-phase inverters in an islanded microgrid. The proposed technique uses adaptive PIDs combined with the communication among the parallel inverters to accurately share active power and reactive power among the inverters via adjusting the desired voltage if there is a distinct difference between line impedance and the load change in the microgrid. Moreover, the paper also presents the response ability of the inverters to maintain the error within the allowed limits as the transmission line is interrupted. The proposed technique has been verified in a microgrid with three parallel distributed generation-inverter units using Matlab/Simulink. In the simulation, as the droop control using the communication information among the inverters, the sharing errors for active power and reactive power are around 0.2% and 0.6%, respectively. As the connection between the microgrid and transmission line is interrupted, the sharing errors for active power and reactive power increase to 0.4% and 2%, respectively. The simulation results have indicated that the proposed technique is superior to the traditional droop control in terms of the accuracy and stability. Therefore, the new proposed technique can be a favor alternative model for active power and reactive power sharing control of parallel inverters in an islanded microgrid.

Highlights

  • This paper proposes a new control sharing method for parallel three-phase inverters in an islanded microgrid

  • Những điều này đã tạo nên một hệ thống điều khiển nhanh chóng, hiệu quả, linh động mà vẫn duy trì được độ ổn định ở mức cao

Read more

Summary

Mô hình lưới Microgrid độc lập

Mô hình lưới Microgrid độc lập với đường truyền thông tin được thể hiện ở hình 1. Trong lưới Microgrid, từng đơn vị DG có thể gửi thông tin công suất của mình về trung tâm (Control Center) thông qua một đường truyền liên lạc. Những phân tích sau đây sẽ được thực hiện đối với các trường hợp với hai bộ nghịch lưu, tuy nhiên có thể được áp dụng cho nhiều bộ nghịch lưu kết nối song song. Các bộ nghịch lưu trong hình 2 có thể được coi là tập hợp các nguồn của các mạng điện phân phối và là nguồn áp được kết nối với thanh cái tải chung thông qua đường dây. Trong một microgrid với N bộ nghịch lưu kết nối song song, và để cho các bộ nghịch lưu có thể chia sẻ công suất theo tỷ lệ, các hệ số droop của nghịch lưu phải tỷ lệ nghịch với công suất định mức tức là, ni , mi và phải thoả mãn các ràng buộc sau đây. Nói cách khác ni nên được chọn sao cho tỷ lệ với điện trở đầu ra R1 và độ lệch điện áp của từng bộ nghịch lưu phải bằng nhau

E E2 E1 0 E1 E2
Vqref dq iq iabc abc id
Trường hợp 1
KẾT LUẬN
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call