Abstract
The growing demand for lightweight and robust materials drives the development of polymer-based and fiber-reinforced composites. Here, using short fibers offers several advantages; however, currently employed methods for producing short fibers, such as homogenization, result in a wide dispersion of dimensions in the produced fibers, which is an undesirable effect in composite materials. In this study, electrospinning is used to produce polymer short fibers directly. This research highlights, for the first time, the differences in the electrospinning process dynamics between short and continuous fibers. By adjusting parameters: voltage and distance, we control dimensions of short fibers below 1 µm in diameter and around 4 µm in length to a few microns in diameter and approximately 14 µm in length. Direct electrospinning of short fibers offers significant advantages, including a narrow size distribution and reproducibility compared to chopped continuous fibers with homogenization.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Composites Part A: Applied Science and Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.