Direct electric curing of alkali-activated fly ash concretes: a tool for wider utilization of fly ashes

Abstract

Utilization of the fly ashes is a major problem in many developing countries and in South Africa only about 7% of the fly ash produced annually by coal-fired power stations, is being utilized. Although, fly ashes can be used as an alternative binder in alkali-activated concretes, strength development of these concretes at room temperature is slow limiting application of the material. Direct electric curing is proposed for heat curing of alkali-activated fly ash concrete which will open new opportunities for in-situ applications of these concretes in the construction industry thus increasing the amount of beneficially utilized fly ash. Alkali-activated fly ash concretes containing unclassified low calcium fly ash, sodium hydroxide and sodium silicate solutions were cured at 60 °C by means of direct electric curing. The electric resistivity and compressive strength development of the concretes were investigated. The resistivity strongly depends on the type of activator used. Compressive strength up to 33.8 MPa and 48.5 MPa at 2 and 28 days respectively, can be achieved after a short period of direct electric curing. This opens new opportunities for wider application of alkali-activated fly ash concretes and for more extensive utilization of fly ash.