Abstract
Charge carrier conductivity and mobility for various semiconductor wafers and crystals were measured by ultrafast above bandgap, optically excited Time-Resolved Terahertz Spectroscopy (TRTS) and Hall Van der Pauw contact methods to directly compare these approaches and validate the use of the non-contact optical approach for future materials and in-situ device analyses. Undoped and doped silicon (Si) wafers with resistances varying over six orders of magnitude were selected as model systems since contact Hall measurements are reliably made on this material. Conductivity and mobility obtained at room temperature by terahertz transmission and TRTS methods yields the sum of electron and hole mobility which agree very well with either directly measured or literature values for corresponding atomic and photo-doping densities. Careful evaluation of the optically-generated TRTS frequency-dependent conductivity also shows it is dominated by induced free-carrier absorption rather than small probe pulse phase shifts, which is commonly ascribed to changes in the complex conductivity from sample morphology and evaluation of carrier mobility by applying Drude scattering models. Thus, in this work, the real-valued, frequency-averaged conductivity was used to extract sample mobility without application of models. Examinations of germanium (Ge), gallium arsenide (GaAs), gallium phosphide (GaP) and zinc telluride (ZnTe) samples were also made to demonstrate the general applicability of the TRTS method, even for materials that do not reliably make good contacts (e.g., GaAs, GaP, ZnTe). For these cases, values for the sum of the electron and hole mobility also compare very favorably to measured or available published data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the Optical Society of America. B, Optical physics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.