Abstract
The purpose of this study was to quantify the dynamic accuracy of kinematics measured by a digital optical motion analysis system in a gait analysis laboratory (capture volume approximately 20 m 3) compared to a standard range direct-current electromagnetic (EM) tracking device (capture volume approximately 1 m 3). This is a subset of a larger effort to establish an appropriate marker set for the optical system to quantify upperlimb kinematics simultaneously with gait, in comparison to previous studies of isolated upperlimb movements that have employed EM tracking devices. Rigid clusters of spherical reflective markers and EM sensors were attached to a mechanical articulator that mimicked three-dimensional joint rotations, similar to the elbow. As the articulator was moved through known ranges of motion (i.e. gold standard), kinematic data were collected simultaneously using both tracking systems. Both systems were tended to underestimate the range of motion; however, the application of post hoc smoothing and least-squares correction algorithms reduced these effects. When smoothing and correction algorithms were used, the magnitude of the mean difference between the gold standard and either the EM or optical system did not exceed 2° for any of the compound motions performed. This level of agreement suggests that the measurements obtained from either system are clinically comparable, provided appropriate smoothing and correction algorithms are employed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.