Abstract

For distances less 10 nm, a total energy transfer occurs from a quantum emitter to a nearby metallic surface, producing evanescent surface waves that are plasmonic in nature. When investigating a metallic nanohole supported on an optically dense substrate (such as diamond with nitrogen vacancy center), the scattering occurred preferentially from the diamond substrate towards the air for dipole distances less 10 nm from the aperture. In addition, an enhancement to the dipole’s radiative decay rate was observed when resonance of the aperture matched the emitters wavelength. The relationship between an emitter and a nearby resonant aperture is shown to be that of the resonance energy transfer where the emitter acts as a donor and the hole as an acceptor. In conjunction with the preferential scattering behavior, this has led to the proposed device that operates in transmission mode, eliminating the need for epi-illumination techniques and optically denser than air superstrates in the collection cycle, hence making the design simpler and more suitable for miniaturization. A design criterion for the surface grating is also proposed to improve the performance, where the period of the grating differs significantly from the wavelength of the surface plasmon polaritons. Response of the proposed device is further studied with respect to changes in nitrogen vacancy’s position and its dipolar orientation to identify the crystallographic planes of diamond over which the performance of the device is maximized.

Highlights

  • The use of optically dense materials to increase the collection efficiency associated with a quantum emitter (QE) is popular [1,2,3,4,5,6,7,8]

  • For distances where the dipole emission is quenched near a flat metallic surface, transmission through a metallic resonant aperture is maximized

  • Unidirectional scattering of Dipole Emission to Surface Plasmon-Coupled Enhanced Transmission (DESPCET) through the aperture into the air is advantageous in moving away from designs based on the reflection geometry that utilize epi-illumination/collection from optically dense substrates or superstrates

Read more

Summary

Introduction

The use of optically dense materials to increase the collection efficiency associated with a quantum emitter (QE) is popular [1,2,3,4,5,6,7,8]. The use of a homogenous diamond film with NV- near the surface aimed to minimize complications (such as total internal reflection) associated with alternative designs where nano-diamonds are integrated with external structures Such a multilayer structure may operate in either the reflection or the transmission mode, numerical analysis showed a higher field intensity being trapped inside the diamond film in comparison to those scattered into the air or into the glass substrate [13]. This may be attributed to the complex interaction of the NV- emission with the air/diamond and/or diamond/glass boundaries, which includes total internal reflections and the quenching of the dipole’s emission by nearby dielectric interfaces. A review on quantum dots and ways to enhance its emission is given by Xu et al [30]

Resonance Energy Transfer
Design of Surface Gratings
Dipole’s Position and Orientation
Crystallographic
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call