Abstract
In an all-digital, class-D audio amplifier, pulse-width-modulation (PWM) of a digital signal source is usually followed by a low-order analog low-pass filter to construct the analog audio waveform. This study shows how to remove the non-linear distortion usually associated with PWM, by prefiltering the digital signal prior to the PWM mapping in such a manner that the overall result is distortion-free. The prefiltering is done using computationally effective infinite-impulse-response filters combined with short-kernel anticausal finite-impulse-response filters, and relies on the interpretation of PWM as a Volterra filter. A case study is presented where a second-order Butterworth analog low-pass filter is used for reconstruction of the analog audio signal. A complete amplifier system is modelled, including upsampling, Volterra prefiltering and noise feedback coding. Computer simulations on CD music signals were performed. Using a third-order prefilter, a signal-to-noise ratio of 97–102 dB was obtained for the music signals tested. All necessary filter data needed for realisation of the prefilter are given in the Appendix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.