Abstract
This paper reports on a differential pressure sensor using a piezoresistive cantilever with the dimensions of 125 µm×100 µm×0.3 µm. The sensor has a higher sensitivity than a traditional diaphragm sensor because of the three free edges of the cantilever. The measured results indicated that the fabricated cantilever bent according to theory when differential pressure was applied. The sensitivity and resolution of the differential pressure were 3.2×10−4 Pa−1 and 0.02 Pa from −20 Pa to 20 Pa, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.