Abstract
In this paper, a differential measurement setup for the light addressable potentiometric sensor (LAPS) is proposed. The LAPS with a HfO2 layer as the sensing membrane was used, and different weight percentages of DNP/(PVC+DNP) [DNP: dinonylphtalate, PVC: poly(vinyl chloride)] membrane were cast on the surface of HfO2-LAPS. The pH sensitivity can be decreased from 58.6 to 24.5 mV/pH by using 60 wt % PVC cocktail. Then, the pH sensitivity measured through a differential circuit was 30.1 mV/pH, showing high potential for replacing the function of a conventional reference electrode as an ion-sensitive field-effect transistor (ISFET)/reference field-effect transistor (REFET) pair. In addition, to confirm the output signal of the two substrate electrodes, a specific measurement setup was used.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
