Diagenetic Facies and Their Controls on the Quality of Tight Sandstone Reservoirs: A Case Study from the Upper Paleozoic Gas Reservoir in the Eastern Ordos Basin, North China

Abstract

Diagenetic facies play a significant role in the evaluation and prediction of reservoirs as they comprehensively reflect the spatial distribution characteristics of deposition, diagenesis, and petrophysical properties. Based on the petrographic observation and considering pores, lithology, and diagenesis types, the diagenetic facies types were identified, and the pore evolution process and its influence on the quality of low permeability tight gas reservoirs were analyzed. The results show that six types of diagenetic facies were identified, including siliceous cementation intergranular pore facies (A), carbonate dissolution pore facies (B), matrix dissolution pore facies (C), clastic dissolution pore facies (D), matrix filling and strong compaction tight facies (E), and carbonate cementation and metasomatism tight facies (F). The evolution process of porosity shows that the restored original porosity is indicated to be between 34.2% and 36.0%. The average porosity loss caused by compaction was 17.1%, while the average porosity loss caused by cementation is 14.1%. The average porosity increased by 2.5% on diagenetic facies B, C, and D due to dissolution. Consequently, diagenetic facies A with weak compaction and diagenetic facies B, C, and D with strong dissolution are effective reservoirs with porosity greater than 6.6% and permeability greater than 0.25 − 0.6 × 10 − 3 μm2. The distribution areas of A, B, C, and D are favorable areas for tight gas exploration and are important indicators for the prediction of tight gas in the Upper Paleozoic Shanxi Formation in the eastern Ordos Basin. This study provides a new petrographic method for reservoir prediction and exploration of natural gas, which has practical value and economic significance.