Development of unstructured mesh-based numerical method for sodium–water reaction phenomenon in steam generators of sodium-cooled fast reactors

Abstract

ABSTRACTWhen pressurized water or vapor leaks from a failed heat transfer tube in a steam generator of sodium-cooled fast reactors, a high-velocity and high-temperature jet with sodium–water chemical reaction may cause wastage on the adjacent tubes. For safety assessment of the steam generator, a computational fluid dynamics code called SERAPHIM calculating compressible multicomponent multiphase flow with sodium–water chemical reaction has been developed. The original SERAPHIM code is based on the finite difference method. In this study, unstructured mesh-based numerical method for the SERAPHIM code was developed to advance a numerical accuracy for the complex-shaped domain including multiple heat transfer tubes. Numerical analysis of an underexpanded jet experiment was performed as part of validation of the unstructured mesh-based SERAPHIM code. The calculated pressure profile showed good agreement with the experimental data. To investigate the effect of the introduction of the unstructured mesh and to confirm applicability of the numerical method for the actual situation, water vapor discharging into liquid sodium was analyzed. The calculated behavior of the reacting jet agreed with the previous experimental knowledge. It was demonstrated that the proposed numerical method could be applicable to evaluation of the sodium–water reaction phenomenon.