Development of Remote Control System for Residential AC Power Supply Based on GSM Technology

Abstract

The present study deals with the development of remote control system based on the Global System for Mobile Communication (GSM) technology for switching the low voltage AC power supply system at residential consumer. Function of this system is to disconnect and reconnect the electricity supply to consumers. The introduction of the GSM technology and particularly the use of hand-held mobile phones has brought the innovative distance communication to remote locations. This utilization of this technology for the remote control of systems and appliances will make life easier, safe and quick from anywhere. GSM module was used for receiving short message service (SMS) from user’s mobile phone that automatically enable the controller to take any further action such as to switch on and off the consumer load at the incoming power supply. The system was integrated with microcontroller and GSM network interface using assembly language. AVR Studio 4 software was utilized to accomplish the integration. The system is activated when user sends the SMS to GSM controller circuit at electric meter consumption panel board. Upon receiving the SMS command, the microcontroller unit then automatically controls the incoming power supply by switching on or off the device according to the user command. In other words, the developed system reads message from the mobile phone and responds to control the devices according to the received message. The system can also give feedback to the user to inform the status of switching operation if such command is received.