Development of novel high anti-pollution polyamide/polysulfate disk tubular reverse osmosis membrane modules and their application in simulated space bathing wastewater

Abstract

Water is a precious resource in space stations, and wastewater recycling is necessary to meet the needs of astronauts. In that respect, applying the high anti-pollution disk tubular reverse osmosis (DTRO) technique is a reliable way to remove pollutes from wastewater. Thin film composite (TFC) membrane treatment is the most frequently employed solution for purifying wastewater in industry; however, the intrinsic weaknesses of polymer membrane substrates, e.g., poor mechanical property, foulant adsorption and low resistance to acidic/basic conditions, greatly hamper their applications. In this study, the novel polysulfate (PSE) membrane substrates were prepared via non-solvent induced phase separation (NIPS) method. The microstructure and performance of PSE membrane substrates were comprehensively investigated at varying polymer concentration and nanoparticle types. The results showed that adding nanosilver to the support layer significantly enhanced the TFC- PSE/Ag membrane performance (up to 57 %) and tensile strength (by 4.57 ± 0.13). According to computational fluid dynamics (CFD) simulations, the optimized geometric design of deflectors would have noticeably improved the flow field distribution and strength, which was consistent with experimental data. The DTRO modules enabled the effective management of wastewater using simulated space bathing wastewater. The effluent met the water reuse criteria in terms of COD concentration, NH3-N concentration, conductivity and turbidity whose respective values were 15 mg/L, 0.21 mg/L, 60 μS/cm, and 0.9 NTU. The proposed DTRO modules own antifouling and acid/alkaline-resistance, indicating their remarkable application potential in the large-scale recovery of bathing wastewater from the earth or space station.