Abstract
Solid oxide fuel cells (SOFCs) can, in principle, directly use hydrocarbon fuels such as methane and liquefied petroleum gas (LPG). It was previously found that nickel-gadolinia doped ceria (Ni-GDC) anode has high durability under LPG utilization in SOFCs. However, the performance under direct LPG utilization was low compared to hydrogen fuel, because anode polarization resistance increased by internal reforming. Carbon was slightly deposited on the Ni-GDC anode after direct LPG utilization for 100 h at 650 oC. In this work, a catalytic partial oxidation reformer was developed for LPG utilization, and high performance was obtained using reformate gas as well as hydrogen without carbon deposition on the Ni-GDC anode for 100 h at 650 oC. Furthermore, microtubular SOFC stacks were developed using mass production technologies, and a proto-type 200 W micro power generator was demonstrated via NEDO project entitled "Technology Development for Promoting SOFC Commercialization".
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call