Abstract
This research describes developing a Fuzzy Logic based weight prediction system (FL-eWPS) during the process of injection molding. The main purpose is to apply Fuzzy Logic to predict defects during injection molding operations while processing parameters, such as shot size, barrel temperature, cooling time, and holding pressure. The parameters are varied within a shorter range when using Delrin 511 DP plastic from DuPont Engineering Polymers. eDART data logging system was used for real-time data collection for the different parameters by using the sensors during the injection filling stages. A Fuzzy Logic reasoning algorithm was applied to gain the threshold values of weight prediction with various processing parameter settings. During the injection molding process, the FL-eWPS system was shown to predict weight with 99% accuracy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
