Development of Concrete Damage Classification in Beam-Column Joint based on Ultrasonic Pulse Velocity

Abstract

The concreted conditions assessment of the systems is an essential aspect of security assessment programs. In situ measurements of Ultrasonic Pulse Velocity (UPV) may be indicative of the level of damage in the original concrete. UPV influenced by the specific characteristics of the mixture. In situ UPV measurements can be indicative of the level of damage in the original concrete. The research purpose is the damage classification, UPV test interpretation (strength, density, elasticity modulus, Concrete Quality Designation (CQD)), and determines the level of structural damage visually so that more accurate inspection results. The research result showed that the plastic hinge was more damaged than other parts of the beam-column joints. The UPV test obtained density 0.84-1.03 g/cm3, CQD 10% -20%, static elastic modulus 7.68-8.39 Gpa according to [3],[4] including very poor and visually is included in category IV spalling off of covering concrete (crack width > 2mm). The use of UPV as supporting assessment for classification, repair, and maintenance of structures. If density, CQD, and elastic modulus of defining very poor classification, the structure that needs immediate repair. The use of UPV is faster, without damaging parts of the structure, and also induces damage to the core specimens as a result of the coring process, making it faster and more economical.