Abstract
Previous studies have shown that the effectiveness of superfine tailings cemented paste backfill (SCPB) is influenced by multiple factors. To optimize the filling effect of superfine tailings, the effects of different factors on the fluidity, mechanical properties, and microstructure of SCPB were investigated. Before configuring the SCPB, the effect of cyclone operating parameters on the concentration and yield of superfine tailings was first investigated and the optimal cyclone operating parameters were obtained. The settling characteristics of superfine tailings under the optimum cyclone parameters were further analyzed, and the effect of the flocculant on its settling characteristics was shown in the block selection. Then the SCPB was prepared using cement and superfine tailings, and a series of experiments were carried out to investigate its working characteristics. The flow test results showed that the slump and slump flow of SCPB slurry decreased with increasing mass concentration, which was mainly because the higher the mass concentration, the higher the viscosity and yield stress of the slurry, and thus the worse its fluidity. The strength test results showed that the strength of SCPB was mainly affected by the curing temperature, curing time, mass concentration, and cement-sand ratio, among which the curing temperature had the most significant effect on the strength. The microscopic analysis of the block selection showed the mechanism of the effect of the curing temperature on the strength of SCPB, i.e., the curing temperature mainly affected the strength of SCPB by affecting the hydration reaction rate of SCPB. The slow hydration process of SCPB in a low temperature environment leads to fewer hydration products and a loose structure, which is the fundamental reason for the strength reduction of SCPB. The results of the study have some guiding significance for the efficient application of SCPB in alpine mines.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
