Abstract
This paper presents a steady-state model of a variable speed vapour injection scroll compressor. Two compressors were investigated. The developed empirical model is based on five dimensionless polynomials that were fitted using experimental data from a 2.7kW scroll compressor. A second set of data was used to show the prediction of the presented model for an other device which exhibits a different swept volume. In both cases, the suction and injection mass flow rate were respectively predicted with a coefficient of determination equal to 99.9 and 94.3% and for the consumed power, 98.4% and 95.6%. A Modelica based dynamic model is then presented. The steady-state validation of the main components models is performed. Finally the control of the cycle using two PID controllers is presented and commented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have