Abstract
New alloys are needed to adapt the material properties and to improve the weldability of arc-based additive manufacturing processes. The classic development of welding filler materials is time-consuming and cost-intensive. For this reason, an alternative alloy concept is investigated and qualified here. This is based on the thin-film coating of welding filler materials by means of PVD coating. An HSLA steel DIN EN ISO 14341-A G 50 7 M21 is used as the base material. This is alloyed with the elements Al, Cr, Nb, Ni and Ti by means of PVD thin-film coating. This procedure represents an alternative alloy concept. In the scope of the qualification, the influence of the process and material properties is investigated, and the alternative alloying concept is compared with the classical alloying concept of secondary metallurgy. The investigations have shown that the thin film coating on the surface of the welding filler metal affects the process properties in the form of a changed arc length. Furthermore, the mechanical properties and the effect on the microstructure morphology were investigated. These were compared in the same chemical composition with a Mn4Ni2CrMo produced by secondary metallurgy. The results are in agreement with regard to the mechanical properties and the effect on the microstructure morphology.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
