Development of a pulsed power supply with tens of milliseconds flattop time.

Abstract

In order to generate a current pulse with tens of milliseconds flattop time on an inductive load for pulse magnetic window technology research, a prototype of pulsed power supply is fabricated and tested. It is composed of several pulse forming units with capacitor banks and a thyristor switch and can generate a flattop current pulse by triggering sequentially the thyristor valve of pulse forming units at certain time or adjust a current waveform by altering triggering time of units. The results show that the prototype with four pulse forming units can generate a current pulse with 5 ms flattop time and 35 kA peak current, and its energy transfer efficiency is significantly higher than that of conventional circuits such as parallel capacitor banks or pulse forming networks.