Abstract
This paper studies a novel structured light measurement instrument for complex manufactured parts. In this research, a quick and accurate light plane calibration method and a novel light strip center extraction method were used to establish the measurement instrument. First, the intrinsic and external parameters of the camera are calibrated by Zhang's method. Second, a novel light plane calibration technique is proposed by using the original parameters and images in the process of camera calibration, which can be used to improve the accuracy of the measurement system because both the camera calibration and light plane calibration are based on the same target. Third, a subpixel extraction method is presented to extract the light strip center on the basis of the geometric center method. Finally, the constructed instrument is used to detect the geometric information of the complex manufactured parts. The experimental results show that the maximum measurement error is 0.1 mm under a measurement range of 50 mm and the accuracy is 0.2%, which indicates that the measurement instrument is fast, robust, and accurate enough to be applied to many kinds of measurements, such as railroad track deformation, the inner wall of a pipe, and so on.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call